Jesse J Heap & Son, Inc. Located in Irvington, NJ
About Us  |  Request Catalogs  | Contact UsSite Map  | Español
  Top Products Inspection & Measuring Machines Konsan Inspection Machine

Konsan Fabric Inspection Machine

(Table Type)

The Konsan Fabric Inspection and Measurement Machines have been designed and produced in order to prevent problems and cost increases that may arise in sewing departments of the apparel industry due to production faults in the fabric.

When required the KONSAN Table Type Fabric Inspection and Measurement Machine is produced featuring edge following and aligning photocells for obtaining the maximum use of fabric.

Optional cut off device for Table Top Models

The Measurment Machine is also equipped with a reversing switch on the unwind cradle which allows you to reverse the rollers to unroll material face in or face out. It also includes separate unwind and rewind motors which can be adjusted independently to maintain perfect tension control. A sensor in the rear cradle which will stop the machine when the material runs out.

Inspection Machine Info


  • Infrared Edge Alignment
  • Multi-function counter for measuring fabric in feet, yards or meters
  • Driven Winding & Unwinding Cradles
  • Tension Adjustment Knob for Stretch Fabrics
  • Bottom and Top Screen Illumination
  • Light box with two levels of illumination plus an overhead light.


  • Programmed Length
  • Length Measurement in Yards & Meters
  • Emergency Stop Button



  KK 190 MT
KK 190 MT-F
KK 210 MT
KK 210 MT-F
Max. Fabric Width 75" 83"
Max. Fabric Roll Diameter 16" 16"
Max. Fabric Weight 150 kg 150 kg
Max. Speed 60 m/min. 60 m/min.
Machine Width 69" 69"
Machine Length 96" 100"
Machine Height 75" 75"
Machine Weight 480 kg
580 kg
535 kg
635 kg


KK xxx MT 220 V.A.C. 1 PHASE
1,1 Kw. 50/60 Hz
Edge Alignment System
KK xxx MTF For USA:
220 VAC, 3 PHASE, 60 Hz
For Others:
380 VAC, 3 PHASE, 50 Hz
Power: 2 Kw
Edge Alignment System