Jesse J Heap & Son, Inc. Located in Irvington, NJ
 
 
About Us  |  Request Catalogs  | Contact UsSite Map  | Español
  Top Products Inspection & Measuring Machines Konsan Fabric Inspection Machine

Konsan Fabric Inspection Machine

(Lap Operating)

The KONSAN Lap-Operating Fabric Inspection and Measurement Machines have been designed and produced in order to prevent problems and cost increases that may arise in sewing departments of apparel industry due to production faults in the fabric.

This fabric measuring and inspection machine is suited for tubular fabrics and lapping. It can handle rolls up to 300 lbs with a maximum roll diameter of 16". It has multi-mode operation including roll-to-roll, roll-to-lap, lap-to-roll, & lap-to-lap.

When required the KONSAN Lap-Operating Type Fabric Inspection and Measurement Machine is produced with edge following aligning photcells for obtaining the maximum use of fabric.

Illuminated bottom screen and illumination from above provides an easy control of fabric.

Konsan Lap Operating Machine

Inspection Machine Info

Features:

  • Counter for measuring the length of fabric that is inspected.
  • AC speed control
  • Specialized mechanism for fabric tension adjustment
  • Handles rolls up to 300 lbs
  • Multi-mode Operations
  • Maximum roll diameter of 16"

 

 

TECHNICAL INFORMATION

  KK 190 MD
KK 190 MFD
KK 210 MD
KK 210 MFD
Max. Fabric Width 75" 83"
Max. Fabric Roll Diameter 16" 16"
Max. Fabric Weight 150 kg 150 kg
Max. Speed 60 m/min. 60 m/min.
Machine Width 77" 77"
Machine Length 96"
108"
104"
116"
Machine Height 76" 76"
Machine Weight 560 kg
660 kg
615 kg
715 kg

ELECTRICAL DATA

KK xxx MD 220 V.A.C. 1 PHASE
1,1 Kw. 50/60 Hz
Edge Alignment System
KK xxx MFD For USA:
220 VAC, 3 PHASE, 60 Hz
For Others:
380 VAC, 3 PHASE, 50 Hz
Power: 2 Kw
Edge Alignment System

OPERATING MODES

Operating Mode 1 : Roll to Roll (for the side-inside rolls)

Setting Point Choose
Loading Fabric Shown Below (Figure 1.0)
Operating Mode Selector Switch Normal Mode
Lapping Mode Arm Normal Mode
Feeding Rollers Direction Selector Switch Side-inside mode
Tension Adjustment Knob Between 2-5
Edge Alignment Photocells On the front group

Roll to Roll
Figure 1.0: Roll to Roll (for the side-inside rolls)

Operating Mode 2 : Roll to Roll (for the side-outside rolls)

Setting Point Choose
Loading Fabric Shown Below (Figure 1.1)
Operating Mode Selector Switch Normal Mode
Lapping Mode Arm Normal Mode
Feeding Rollers Direction Selector Switch Side-outside mode
Tension Adjustment Knob Between 2-5
Edge Alignment Photocells On the front group


Figure 1.1: Roll to Roll (for the side-outside rolls)

Operating Mode 3: Lap to Roll

Setting Point Choose
Loading Fabric Shown Below (Figure 1.2)
Operating Mode Selector Switch Normal Mode
Lapping Mode Arm Normal Mode
Feeding Rollers Direction Selector Switch **********
Tension Adjustment Knob Between 2-5
Edge Alignment Photocells On the front group


Figure 1.2: Lap to Roll

Operating Mode 4: Roll to Lap

Setting Point Choose
Loading Fabric Shown Below (Figure 1.3)
Operating Mode Selector Switch Lap Mode
Lapping Mode Arm Lap Mode
Feeding Rollers Direction Selector Switch **********
Tension Adjustment Knob Between 6-9
Edge Alignment Photocells On the Main Body


Figure 1.3: Roll to Lap

 

Operating Mode 5: Lap to Lap

Setting Point Choose
Loading Fabric Shown Below (Figure 1.4)
Operating Mode Selector Switch Lap Mode
Lapping Mode Arm Lap Mode
Feeding Rollers Direction Selector Switch **********
Tension Adjustment Knob Between 6-9
Edge Alignment Photocells On the Main Body


Figure 1.4: Lap to Lap